• Getting Started with the UMN SuperCDMS Group
• SuperCDMS ComputeCanada Cedar Cluster DMC access
• CDMS Group Meetings
• Useful Papers
• K100 Publications & Theses
• Analysis and Simulations Projects
  • NEXUS
    • HVeV
    • L1 Trigger
  • CUTE
  • IMPACT
  • SuperCDMS SNOLAB background simulation
  • 2D Source Mover
  • SNOLAB Shield
  • Run 73 (GeHV prototype) gain and noise analysis
  • Thermal Neutron Calibration: NaI and HPGe

• Detector Monte Carlo simulations
• Detector Monte Carlo simulations of CUTE T3
• K100 Lab Background simulation
• IbIs Automation
• 100 pin to 50 pin Connector for RevE boards
• DAQ with RevE DCRC board

* SuperCDMS Position Reconstruction - DSMMA Project

• People in lab this week
• To-Do List
• K100 Simulation
• Transfer Signup

• K100 Run Diary
• K100 Run Summary
• Fridge Temperature Monitor

• LHe and LN2 Orders
• K100 Data Summary and Data Quality
• Detectors Tested @ K100
• Cooldown checkout sheets

• UMN K100 Test Facility
• K100 Meetings
• K100 Daily Checkout
• K100 Fridge Procedures
• K100 Fridge Components
• K100 Fridge Test Result & Thermometry
• Tower Thermometers
  • Ruthenium Oxide thermometer U02844
  • New Ruthenium Oxide RTD thermometer RX-102B-RS
• Breakout box pinout: PDF Excel
• Drawing repository
• 150 mm Si Detector Designs
• 100 mm Contact Free Detector
• Tower Replacement Designs
• Documentation of K100 Inner Fridge Maintenance

• Neutron Shield
• Lead Shield
• Upgrade for SNOLAB Tower
• Pump Maintenance
• Mixture
• Main Bath Calculator
• LHe recovery record

• K100 Analysis Ebook Page (DEAD)
• K100 Analysis Ebook Page (DEAD)
• K100 Analysis Ebook Page
• UMN CDMS internal web page (DEAD)
• UMN CDMS internal web page
• note: files for web pages are located at /project/spa-webgroups/cdms/public_html/cdms_restricted
• iZIP ebook

• Guide to Automated Processing and Data Database
• Current Data Processing Procedure
• Copying data to SLAC and Google Shared Drive
• Loading data onto a SLAC jupyter notebook
• Data processing notes (last updated 2011)
• Data analysis notes
• Pulse analysis notes
• UMN Analysis Projects (old)
• DTC meeting: 2010-05-07
• VNC setup
• Remote jupyter
• Setup jupyter on cdms2
• IbIs analysis on cdms2

• cdmsbat installation
• cdmsbat configuration
• Current CDMSBATS directory

• Gamma Spectrum for s34 and Analysis
• Allison's Practice
• Shannon's Histograms

• Moving Plans
• Inventory
• Laboratory Safety Procedures
• Radon and Particle Counts
• Gamma Background
• EMF Background
• PuBe neutron source notes
• Covid-19 Pandemic Lab Hibernation
• NaI array notes
• Onboarding steps

• Guide to Automated Processing and Data Database
• MIDAS
  • MIDAS DAQ Instructions 2025
  • MIDAS DAQ Instructions 2022
  • MIDAS ODB info 2022
  • MIDAS DAQ for RevE on cdms3
• List of CDMS servers
• SQUID tuning
• Ethernet Switch

• DCRC v1
• DCRC v2
• DCRC v3
  • DAQ with DCRC v3

• Monte Carlo Sim Source Code Dictionary
• Helpful macros
• Simulation Optics Data
• Photoelectron Counts, Gamma Catcher (Slab)

• Meeting Agenda
• Monte Carlo
• SiPM and Plastic R&D Ebook
• Data Collection Log
• Log of Plastic Scintillator Samples
• Plastic Scintillator Fabrication Log
• Procedures
• Log of Research Papers (sources)
• Veto paper drafts

• k100 cold hardware inventory and status
• 100mm design docs
• Frequently used cold hardware design documents
• CDMS II ZIP DIB pinout
• SQUET pin diagram
• SQUET/Stripline/Warm cables Pin Diagram
• UCB electrical check sheets
• Cold hardware page
• Source mover
• Thermometers
• Scheme for mounting without Soudan towers

• SQUET/Stripline/Warm cables Pin Diagram
• DCRCs
• High Voltage Board (originally designed for iZIP v6)
• HPGe Detector
• HPGe Boron shield
• Diverter board
• Remote HV
• Lakeshore 372 Resistance Bridge and Scanner
• Webcams
• NaI Detectors

• Windows - Remote Network Drives
• CDMSBats
• Install Maestro
• Test Page
• Procedure to open and tighten the needle valve