To-Do List for K100
- Labview DAQ stability issues
- Fix software freezing
- Determine consistent event rates during run
- Side note- LabView software station?
- DCRC boards
- Coordination with FNAL for establishing simultaneous use of boards
- Interface boards
- Hassan
- Hardware for 100 mm tests (to take place in 2012)
- Adapter plate (make)
- Source holder (make)
- SLAC
- Side-Coaxes(acquire)
- Position 1, Position 4
- SQUET card (acquire)
- Stripline
- New switch and ethernet card
- Tower face problems (two sides)
- Automation of DAQ-CDMSBATS interface
- Reduce time in obtaining reduced quantities (RQs)
- Determine steps to solve this issue - need heavy contact with Jeter
- Jianjie, Allison
- Microscope for clean room
- ask Stein about magnifier
- Digital camera for lab
- Alex
- LN2 scale
- Allison
- K100 manual revision
- Rough copy by 2011/12/12
- Roxanne, Allison, Alex
- Side-coax replacement
- Design/build by end of semester
- Test next year
- David
- Ib-Is measurement through LabView
- Alex
- K-40 source studies
- Allison
- Am-241 source holder
- Extract source from holder
- Fabricate new source holder - install
- Jianjie
- Gd-loaded polyethylene tests
- iZIP surface event rejection tests
- Need to establish neutron-gamma rejection
- Will need simulation work
- Thinking ahead, will need beta source
- Vuk
- Lab library
- Roxanne, Hassan
- Get Windows machine established