2023/01/05 (Thursday)
- Lab in-personnel: Himangshu
| Status | Run 76 finished |
|---|---|
| Setup | DCRC33(2)→HV control, NaI trigger signal → DCRCX(4) |
| IVC closed and Turbo pumping for a while. No tower - this was just for a leak test. |
| List of Tasks before the next run | |
|---|---|
| 1 | Detector Control GUI button in Pulse Viewer(SQUID Tuning GUI) is not working |
| 2 | ZAP and FLASH in ODB Tools in not working |
| 3 | To mount new RuOX thermometer, need new solder joint changes in Diverter Board |
| 4 | Fix location of Motor 1 in source mover and test for Motor 2 movements in test bench. One possibility Google doc |