| Status | Run 76 in progress |
| Setup | Cables 2/3/1 → diverter/nothing/nothing → Side2-readout HV CONN 1/3/2 → HV 1(L)/2(R) → DCRC50(3)/DCRC55(1), DCRC33(2)→HV control, NaI trigger signal → DCRCX(4) |
| 1045 | MC/Coldplate = 28.1/145 mK, Still = 1.09 K / 0.100 mbar / 0 mW, G1/G2 = 131/130 mbar, 1K Pot = 45° / 1.55 K / 8.5±0.5 mbar, MB = 74.3% |
| 1053 | Fill LN2 cold trap bath. |
| 1600 | Cut shorter two vertical bars of NaI rack that attach to the ceiling of the fridge stand. Raise the back crossbar that these attach about 2 inches higher. This will allow for draping the boron-shield tubes over the detectors. We are working on a design of filling long tubes of fabric with boron powder and draping these over the detector stack. |
