2019/10/10 (Thursday)
| Status: Beginning re-installation and Tower Assembly | |
| 1500 | Attach thermometer to source mover plate. |
| 1530 | Set Indium blockers into source slots |
| 1530 | Place a 2.95mm wide blocker 5-7 mm from the center of the plate away from the motor and another one 3.07mm wide 24-27 mm from the center of the plate away from the motor.  |
| Description | Distance |
|---|---|
| Center to edge of blocker 1 | 4.04 mm |
| Width of Blocker 1 | 2.95 mm |
| Center to edge of blocker 2 | 25.05 mm |
| Width of blocker 2 | 3.07 mm |
 |  |
 |  |