| 1200 | Refilled Cold Trap 1 from LN2 dewar |
| | Found that DCRC5 was turned “yes” which was causing the DAQ issue yesterday |
| 1340 | Cable 1, DCRC4(SQuid Bias: -91.7, -80.8, 0, 0 LockPoint: -9.45, -3.12, -4.21, -7.36 ) and Cable 3, DCRC3(SQuid Bias: -70.4, -100.5, 0, -75.4 LockPoint: -4.55, -13.15, 0, -2.64 ) |
| 1358 | Realized DCRC3 cannot trigger on channels. Sp, replace it with DCRC1 |
| | Cable 1, DCRC4(SQuid Bias: -91.7, -80.8, 0, 0 LockPoint: -9.45, -3.12, -4.21, -7.36 ) and Cable 3, DCRC1(SQuid Bias: -70.4, -100.5, 0, -75.4 LockPoint: -4.55, -13.15, 0, -2.64 ) |
| 1500 | Pulses were lagging a lot, so connected DCRC3 in loop but not used for any cables |
| 1543 | Trigger Cable3 pB == Side2pA on DCRC1pB, Trigger Threshold on DCRC1pB=35 |
| 1907 | Stopping data taking. About ~3 hrs of 0V data, source at center, trigger on outer channelA |