UMN CDMS Wiki archive
start › cdms › k100 › run_diary › 20170521

2017/05/21 (Sunday)

Previous Day

Setup: DIB1/3/4 → 3.2 MHz filters 3/1/2 → cable 3/1/2 →gender changer 3/1/2 → HVConn 1/3/2 → HV 1/2 → DCRC55/DCRC33
PuBe source in paraffin barrel behind shield (west side)
Na-22 source hanging along southeast column of fridge stand
1107 Took NaI-triggered data overnight @50V. Midas web interface is down
1111 Tower/MC/Coldplate = 33.0/30.7/191 mK, Still = 1.28 K / 0.110 mbar, G1/G2 = 222/214 mbar, 1K Pot = 1.669 K / 20.0 mbar. Main Bath = 30.1%.
1115 Restart DAQ with ./start_daq_umn.sh. The web interface is back up. It says the most recent series (6620) started at 0758 this morning and ended at 1114 (when I restarted the daq). The most recent raw series on disk dump is 07170521_0758, which has 27 dumps. Looking at the most recent dumps, it seems all channels were intact(despite what I told Anthony on the phone this morning).
1118 Fill LN2 cold trap. Tweak 1K pot needle valve
1123 HV=51.4 V, Vtest=4.06 mV → Vtrue=49.8 V
1135 Begin LHe transfer, MB=30.1%
1143 Reduce HV =0 V. Begin 1 hour bake.
1219 Cease LHe transfer, MB=90.3%
1249 Bake complete, pre-bias to HV=65V
1304 Reduce HV=55.0 V, settles at Vtest=4.14mV → Vtrue=53.34V
1314 Reduce HV=51.8 V, Vtest=3.52 → Vtrue=50.39 V
1318 Tower temp back to 34.3mK, set driver offsets
1321 Reduce HV=51.37 V, Vtest=3.42 → Vtrue=50.0 V :)
1324 Start 12 1-hour data series of 1-sided 50V HV coincidence data with Frontend Gain = (15/15/5)/(3/4/4), OG = 4/2, QET biases = table from Apr 28, with 1000 beginning randoms, no flashing, and a 500ADC bin threshold trigger on DCRC4 pA (external trigger). Running OR trigger of NaI detectors with PuBe source on west side of shield. NaI detector C has 311 mV threshold and detector B has 288 mV threshold
1644 Realize logging had not been enabled, turn it on in ODB.

Next Day