2015/11/23 (Monday)
| 0810 | Status: Tower assembled and ready to install. |
|---|---|
| 0830 | Remove tower from purge and place in mini cleanroom |
| Orienting the tower with DIB1 facing East (toward door), repeating orientation from last run: |
| Direction | DIB | SQUET | Stripline | Rerouting boards |
|---|---|---|---|---|
| East | DIB1 | ZC-23 | 19 | present |
| West | DIB2 | ZC-70 | 27 | present |
| SW | DIB3 | ZC-13 | 20 | absent |
| 1200 | finish attaching adapter to 50 mK can. Clean flange on bottom of IVC middle piece. |
|---|---|
| 1300 | connect tower thermometer plug. Reads correctly at bridge. |
| 1430 | finish installing 100mK stage |
| 1750 | Attach striplines and SQUETS to 4K stage. Perform an electrical check to ensure no shorts or unexpected values. Electrical checks on all dibs OK. Complete 4K stage installation and torquing. Come tomorrow morning we only need to seal the bottom IVC flange and commence pumping out. |