| 1009 | Start 1 cycle of 30min runs of background data at +/-1V, -/+1V, +/-3V, -/+3V, FG=5/2/5, OG=3, 1000 initial randoms, 2000 events/file, 30s flash and 25min cooldown after. |
| 1530 | Start 2000 randoms of 20ms trace length background data at 0V, 400uA QET bias, FG=5/2/5, OG=0/1/0, 2000 events/file. |
| 1533 | Quit data series because I accidentally set the run length to 3min. |
| 1542 | Start using MultiDAQ instead of DAQDAQ for this, so that we don't have to specify a run length. Start a series with same settings but stop it immediately because I didn't specify a trigger file. |
| 1544 | Start 2000 randoms of 20ms trace length background data at 0V, 400uA QET bias, FG=5/2/5, OG=0/1/0, 2000 events/file. Event rate of ~1.2Hz. |
| 1553 | Rate has dropped to ~0.3Hz. Set DIB1 (DCRC55) pA's trigger threshold to 3 ADC bins. Rate immediately increases to ~4Hz. It shouldn't matter since it's random, but… ya know… |
| 1633 | LabVIEW crashed after copying the data dumps to Chokula, so reboot LabVIEW for overnight data. |
| 1645 | Restart LabVIEW and reset phonon threshold values to Wednesday's (above). |
| 1657 | Place Cf source inside shield near detector for overnight CF data. |
| 1702 | Start 5 cycles of 30min runs of Cf data at -/+4V, +/-2V, +/-4V, FG=5/2/5, OG=3, 1000 initial randoms, 2000 events/file, 30s flash and 25min cooldown after. |
| 1714 | Fill LN2 cold trap full. |
| | Main bath: 50.8%. |