Table of Contents
2010/02/25
Run diary
| Time | |
|---|---|
| 14:47 | Save 'New LabView VIs' from Jeter to I:\Labview\DCRC\IbIs |
| Rename I:\Labview\DCRC\DCRC_RevA_Modular\DCRCDAQTests\IbIs.vi to IbIs_20091223.vi | |
| Copy I:\Labview\DCRC\IbIs\* to I:\Labview\DCRC\DCRC_RevA_Modular\DCRCDAQTests. | |
| 14:57 | Disconnect function generator from the QET bias line. |
| Stop I:\Labview\DCRC\20091223\DCRC.llb\SCDMS_DetectorControl.vi | |
| Start I:\Labview\DCRC\DCRC_RevA_Modular\DCRCModular.vi |
| Settings for connection | |
|---|---|
 |  |
| Time | |
|---|---|
| 15:12 | Tried to run the new IbIs subvi but the it didn't stop at the end of the bias sweep. I fixed this problem in my version, but it is still there in the UF version. I'll go back to my own version: delete IbIs.vi and rename IbIs_20091223.vi to IbIs.vi |
| 15:28 | Take IbIs run001 to run004 for channel A, B, C, D |
| 16:33 | Fit IbIs data: tried using IBIs_Read_File.vi, didn't quite work out. I'll use the matlab code from Tarek |
| Start from I:\cdms\matlab\IV\IbIs_Data\ibis.m |
IbIs result
All data and plots can be found here.
| Senser | RSC (mΩ) | RN (Ω) |
|---|---|---|
| A | 4.0 | 1.32 |
| B | 2.2 | 1.66 |
| C | 3.1 | 1.87 |
| D | 1.9 | 1.48 |
| IbIs result calculated by matlab code from Tarek |
|---|
 |
 |
 |
 |
 |
 |
 |
 |
Data
SQUID settings for the following measurements
| Run # | Comment |
|---|---|
| 1 | IbIs phA |
| 2 | IbIs phB |
| 3 | IbIs phC |
| 4 | IbIs phD |
| 5 | IbIs phA 1uA step sweep |