| Teleconference link: | https://umn.zoom.us/j/2461438631 |
| Domestic: | 1-646-558-8656 (US toll) |
| Domestic: | 1-408-638-0968 (US toll) |
| Access code: | 908-227-5310 |
- Lab Update - Run 77 preparation
- Detector Control GUI working again after recompiling and defining appropriate variables.
- Found the short on the Source mover coil. The coil wires were loosely held at Pin1 and Pin 4 which came off when I removed the Kapton tape. Resolder the pins and did a quick test to make sure the Y-arm is moving smoothly.
- Zach made the washer plate for the Am source stage using a copper piece. Pictures
- Zach started cryocleaning yesterday. We are planning to start cooldown on Monday.
- Calibration curve for the new thermometer implemented in the Labview VI.
- Priority Updates
- General Updates
- Himangshu
- Shubham
- Jack
- Cosmo Seminar
- 01/23/23
- 12:20-1:10 PM
- Tate 201-20
- Derek
- Zach
- Scott
- Giulia
- Fun Update