| Teleconference link: | https://umn.zoom.us/my/fritts |
| Domestic: | 1-646-558-8656 (US toll) |
| Domestic: | 1-408-638-0968 (US toll) |
| Access code: | 908-227-5310 |
- Lab Update
- Adjusting QET biases, was able to achieve noise width less than 5 eVee!
- seems to be a sweet spot. Looks like if they're set too low in transition
- seems to be a sweet spot. Looks like if they're set too low in transition some channels start showing electrothermal oscillations.
- Run 75 finished. Warming up now, deinstall next week.
- Priority Updates
- General Updates
- Himangshu
- Found that partition plots are insensitive for source movement within a single channel.Nick mentioned this in this note: https://zzz.physics.umn.edu/!cdms/cdms/k100/run_summary/run_71/partition
- Repeated phonon delay plot done by Nick (as Prisca suggested) and found a similar slope of xy-delay vs source position as in https://zzz.physics.umn.edu/!cdms/cdms/k100/run_summary/run_71/delay
- p0=1.1654, p1=1.71923, p1 is the slope of above plot
- Shubham
- Jack
- Derek
- Zach
- Michael
- Scott
- Giulia - ibis_data_updated.xlsx
- Giovanna
- Nikki
- Pramod
- Fun Update