UMN CDMS Wiki archive
start › cdms › k100 › run_diary › 20240501

2024/05/01 (Wednesday)

Previous Day

  • Lab in-personnel: Himangshu
Status Run 80 ongoing
1247 Rechecking Squid bias settings. HV box, config 1, DCRC3 Master
DCRC3pA: -77.4 uA, -7.81 mV
DCRC3pB cant see test signal. Plug the DCRC3 time sync to turned OFF DCRC5 port and phonon offset went away. Can see test signal. -78.3, -3.04
DCRC3pD -102.6, -5.53
1315 Started SC noise. Run #48665. DCRC3 and DCRC1 enabled through HV box. DCRC3 is master, DCRC1 is slave, DCRC3 slave port is connected to DCRC5 but not powered on.

Next Day