2024/02/02 (Friday)
- Lab in-personnel: Himangshu
| 0940 | DCRC1 and DCRC3, DCRC4(dummy) are initialized. Connect Cable 1 on DCRC3(and Cable 3 on DCRC1) and Start frontends(dcrc_driver01, towerfe3_01, triggerfe2). Set SQUID bias and lockpoints. Cable 1(SQuid Bias: -91.7, -88.4, -74.6, -100.5 LockPoint: -9.45, -3.01, -4.21, -7.36 ) and Cable 3(SQuid Bias: -70.4, -101.7, 0, -75.4 LockPoint: -4.55, -4.65, 0, -2.64 ). Need to change Open Loop to Non-inverting and Pre-Amp to Feedback as well. DCRC3 is master, other slaves |
|---|---|
| 0945 | Source is at the center. |
| 0950 | Check if Cable1 is on DCRC1 |