| | Setup: DIB1/3/4 → 3.2 MHz filters → cables1/2/3 → DCRC55(1)/33(2)/50(3) |
| 1115 | Tower/MC/Coldplate = 33.1/36.2/225 mK, Still = 1.3 K / 110 μbar, G1/G2 = 175/153 mbar, 1K Pot = 1.68 K / 22 mbar. MB = 24.2%. |
| 1115 | Put Y-88 source in safe. Fill LN2 coldtrap. |
| 1125 | Commence LHe transfer (22.4%). |
| 1215 | End LHe transfer (92.0%). |
| 1224 | Released pressure from MB. |
| 1300 | Re released pressure from MB. |
| 1908 | put 88Y source back near fridge and adjust position to be closer |
| 1920 | took several test series and had an MHTTPD crash when trying to start a sequence of data taking, restart DAQ and try the sequence again, the sequence was with a modified Dont_You_Dare_Flash_andTake.msl |
| 1934 | Start sequence of 36 one-hour data series of 0V data with Frontend Gain = 5/2/5, OG = 8/3/8, with 2000 beginning randoms (because of increased pileup from higher source rate), with no flashing in between series, triggered with NaI coincidence setup (low threshold 100mV high threshold 135mV and 1100V on NaI detector) using DCRCX (DCRC4) PhA. |