| 0945 | Wipe down clean room tent with isopropanol. Open IVC bottom flange. Commence tower unistallation. |
| 1030 | Tower is not centered with respect to 4K plate. It is leaning to the west and slightly south. It can be wobbled around. |
| 1100 | 600mK rod does not appear to be touching either can |
During uninstallation, it was noted that the SQUET/Striplines for each DIB were not recorded properly. Correct list included below:
East dib1 ZC-13 stripline 19
West dib2 ZC-70 stripline 27
SW dib3 ZC-23 stripline 20
| 1510 | Place tower (double bagged) in clean room purge cabinet. |