Below is the current list of broken traces in striplines 20, 21, and 27. The first number in the 'Broken Connections' pair refers to the pin on the SQUET end of the stripline, and the second number in the pair refers to pin on the D50 connector.
| Stripline | Broken Connections |
| Candy | None |
| 20 | 21-7 (Qo Bias) |
| 21 | 2-17 |
| 21 | 15-15 |
| 21 | 3-31 |
| 21 | 16-14 |
| 21 | 41-30 |
| 21 | 28-47 |
| 21 | 26-49 |
| 21 | 37-50 |
| 21 | 27-32 |
| 21 | 1-33 |
| 21 | 14-16 |
| 21 | 44-26 |
| 21 | 31-43 |
| 21 | 40-48 |
| 21 | 43-44 |
| 21 | 29-46 |
| 21 | 42-45 |
| 21 | 30-28 |
| 21 | 32-42 |
| 21 | 21-7 |
| 27 | 31-43 (Feedback Coil C) |
| 27 | QET Return D |
| Table 1: UMN Made Stripline Pinouts by Wire Bundle |
| Bundle | Stripline D Socket | Material |
| 1 | 50 and 32 | CuBe |
| 1 | 33 and 16 | manganin |
| 1 | 11 and 9 | manganin |
| 1 | 31 and 14 | CuBe |
| 1 | 47 and 30 | manganin |
| 2 | 46 and 48 | manganin |
| 2 | 45 and 28 | CuBe |
| 2 | 5 and 4 | manganin |
| 2 | 12 and 29 | manganin |
| 2 | 15 and 17 | manganin |
| 3 | 1 and 18 | manganin |
| 3 | 2 and 20 | CuBe |
| 3 | 39 and 38 | manganin |
| 3 | 43 and 26 | manganin |
| 3 | 25 and 42 | manganin |
| 4 | 36 and 37 | manganin |
| 4 | 41 and 40 | manganin |
| 4 | 10 and 27 | CuBe |
| 4 | 44 and 22 | manganin |
| 4 | 8 and 23 | manganin |
| 5 | 49 and 13 | manganin |
| 5 | 19 and 35 | manganin |
| 5 | 3 and 34 | manganin |
| 5 | 7 and 21 | manganin |
| 5 | 6 and 24 | CuBe |
| 1201 | S21 connection 37 to 50 should be 39 to 50. |
| | S21 4 to 13 doesn't stabalize. Sometimes broken. |
| | S21 45 to 41 only works if slighty bent on SQUET side. |
| | S21 17 to 29 only works if SQUET side is held from behind. |
| | S21 21 to 7 is not broken. |
| | Results for Stripline 19, 20, 27 and Candy are consistent. |
| Striplines 19, 20, 21, 27, and Candy were installed in the fridge. |