2012/10/21
| 0440 | Took advantage of a detector flash to fill N2 cold trap full. |
|---|---|
| 0625 | Fed Cricket 3 pellets. |
| 1227 | Filled LN2 cold trap. |
| 1312 | Fed Cricket 3 pellets. |
| 1830 | Start LHe transfer (16.9%). |
| 2325 | Remove Ba-133 source and place poly-lead shield part that was removed to accommodate the source, back to where it belongs. Start data acquisition. Flash for one hour, followed by cool down for 2 hours. Then take 3 hour-long data series at -/+3 V bias, followed by three 60-minute data series at +/-3 V bias. Flash all LEDs for 6 seconds between data series with usual settings, and wait 20 minutes for cryostat to cool. Finish with a 20 minute flash and 2-hour cool down. |
| Pulses in test data set look fine. | |
| 2335 | Fill N2 cold trap full. |
| Fed Cricket 2 pellets. |