2012/05/16

0020	Fill N2 cold trap full.
0030	Reset timing link and restart DAQ, DCRC32 using port 5000.
0035	Thought I could catch the last bus home, but no… DAQ crashed. Again, lost connection to DCRC32. Cycled power on DCRC32. Start flashing detector.
	Noted a couple of other DAQ problems:

After changing biases in DetectorControl vi and writing to board, the boards return slightly different values. Have to repeat the process again in order for the correct values to be written to the boards.
No matter how many times one tries to set Output Gain to 1, value 0 is written to board.

0055	Stop flashing detector.
0125	Revert to old version of DAQ. DCRC33 uses port 5000, DCRC32 uses port 5001. Restore timing link and start new data series: 07120516_0120 (D1 +4.0 V, D2 -4.0 V), 50/0.1/20 mins run/flash/wait.
1046	Momentarily removed (< 0.5 min) the Ba-133 source (thought that maybe Ba-133 source should have been put away in the morning regardless), but this was in between a data taking process.
1110	Stopped DAQ. Started liquid helium transfer (0.4%).
	Filled N2 cold trap full.
1205	End LHe transfer (92.7%).
1300	Start flashing detector.
1625	Stop flashing detector.
1715	Start new data series: 07120516_1715 (D1 -4.0 V, D2 +4.0 V), 50/0.1/20 mins run/flash/wait.