| 0055 | DAQ crashed - out of memory problem. Part of first data set taken. |
| 1130 | Filled LN2 cold trap. |
| 1325 | Start flashing detector. |
| 1625 | Stop flashing detector. |
| 1935 | After a lot of effort getting the boards to work, start data series 07120514_1931 (DIB1 +4.0 V, DIB2 -4.0 V). Use port 5000 for both boards. |
| 1945 | DAQ crashed again at 1944. Flash detector for a few seconds. |
| 2010 | Swap master and slave boards: now DCRC33 (DIB1) is master. Restart timing link. Start data series 07120514_2010 (DIB1 +4.0 V, DIB2 -4.0 V). |
| 2025 | DAQ crashed again at 2020. Flash detector for a few seconds. |
| 2140 | Try again, this time use port 5000 for DCRC32 and port 5001 for DCRC33: 07120514_2137 (DIB1 +4.0 V, DIB2 -4.0 V). |
| 2320 | Almost got through 2 hours! Alas, DAQ crashed at 2322. Good enough for now. Flash detector for a few seconds. |
| 2355 | Fill N2 cold trap full. |