Table of Contents
2011/04/07
| 0946 | Stop the daq at 07110407_0838, the 8th series of true -1V sweep. |
|---|---|
| 0950 | Temperature fluctuation around midnight didn't show up last night. |
| 0956 | Start taking data 07110407_0956_F0001. Calibrated +1V on Q1-4. Trigger: Q1(30ADC) OR Q2(30ADC) OR Q3(30ADC) OR Q4(30ADC); coincidence time 50us. Trace length 1024, lookback time 100us. DCRC30 on DIB1, ZIP2, master; DCRC33 on DIB2, ZIP1, slave. Auto run enabled, take data 30min, flash 20min, cooldown 40min. Flash settings: DIB2, LED 1&2; DIB1, LED1; LED current 0.6mA, 100us ON, 2500us OFF. Tower T 62.8mK. |
| Temperature in the past 12 hours |
|---|
 |
| 1210 | Filled N2 cold trap |
|---|---|
| 1932 | Stop DAQ after +1V bias sweep ending at 07110407_1846_F0002. Load calibrated +2V setting into DAQ. |
| 1955 | Filled N2 cold trap. |
| 2002 | Start taking data 07110407_2002_F0001. Calibrated +2V on Q1-4. Trigger: Q1(30ADC) OR Q2(30ADC) OR Q3(30ADC) OR Q4(30ADC); coincidence time 50us. Trace length 1024, lookback time 100us. DCRC30 on DIB1, ZIP2, master; DCRC33 on DIB2, ZIP1, slave. Auto run enabled, take data 15min, flash 20min, cooldown 40min. Flash settings: DIB2, LED 1&2; DIB1, LED1; LED current 0.6mA, 100us ON, 2500us OFF. Tower T 66.3mK. |
Calibrated +1V bias
Data:
07110407_0956
07110407_1111
07110407_1227
07110407_1343
07110407_1500
07110407_1616
07110407_1731
07110407_1846
The cuts are defined as
- cQ# = max([Q1, Q2, Q3, Q4], [], 2)==#
- cQCchisq = cQ1chisq & cQ2chisq & cQ3chisq & cQ4chisq
- cE1 = 15 < Q1;
- cE2 = 15 < Q2;
- cE3 = 10 < Q3;
- cE4 = 20 < Q4;
- cE = 50 < Qsum.
Comments:
Plots
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Calibrated +2V bias
Data:
07110407_2002
07110407_2121
07110407_2236
07110407_2355
07110407_0112
07110407_0231
07110407_0347
07110407_0502
07110407_0619
07110407_0735
The cuts are defined as
- cQ# = max([Q1, Q2, Q3, Q4], [], 2)==#
- cQCchisq = cQ1chisq & cQ2chisq & cQ3chisq & cQ4chisq
- cE1 = 15 < Q1;
- cE2 = 15 < Q2;
- cE3 = 10 < Q3;
- cE4 = 20 < Q4;
- cE = 50 < Qsum.
Comments:
Plots
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |