UMN CDMS Wiki archive
start › cdms › k100 › run_diary › 20100304

2010/03/04

Run Diary

Time
10:26 Jeter sent a new version. Test flashing function in DAQ, a new error occurred
Error in 'autorun' fuction
A connection error occurred when it's time to do the flashing. The flashing still worked as can be seen from the temperature change.
Socks after the above error
Time
10:56 More detailed test: Error windows poped up before flash starts, flash started and ended successfully, SQUID are locked after flash
DCRC settings
Before flash During flash After flash 
devd 1
 Dev1.Ch0=0000 SignalSrc
 Dev2.Ch0=1111 Zap
 Dev3.Ch0=1111 QetHeatEna
 Dev4.Ch0=0000 TstFetLeds
 Dev5.Ch0=00A4 Dac_Led1
 Dev5.Ch1=00A4 Dac_Led2
 Dev5.Ch2=0FFF Dac_ZapV
 Dev5.Ch3=0000 Dac_Test
 Dev6.Ch0=0000 Unused
 Dev7.Ch0=27FF DacBiasQO
 Dev7.Ch1=27FF DacBiasQI
 Dev8.Ch0=1D0A DacBiasQA
 Dev8.Ch1=1D67 DacBiasQB
 Dev9.Ch0=1D67 DacBiasQC
 Dev9.Ch1=1D67 DacBiasQD
 DevA.Ch0=0711 PhononA
 DevB.Ch0=0711 PhononB
 DevC.Ch0=0711 PhononC
 DevD.Ch0=0711 PhononD
 DevE.Ch0=0BCC SqABias
 DevE.Ch1=0800 FbAnull
 DevE.Ch2=0800 FbBnull
 DevE.Ch3=0BFF SqBBias
 DevE.Ch4=0AAC LckPntA
 DevE.Ch5=0AB8 LckPntB
 DevE.Ch6=07FF vOffsetA
 DevE.Ch7=0800 vOffsetB
 DevF.Ch0=0BCC SqDBias
 DevF.Ch1=0BAD SqCBias
 DevF.Ch2=0ACC LckPntD
 DevF.Ch3=0A8F LckPntC
 DevF.Ch4=0800 FbCnull
 DevF.Ch5=0800 vOffsetD
 DevF.Ch6=02CD vOffsetC
 DevF.Ch7=0800 FbDnull
devd 1
 Dev1.Ch0=0000 SignalSrc
 Dev2.Ch0=1111 Zap
 Dev3.Ch0=1111 QetHeatEna
 Dev4.Ch0=0001 TstFetLeds
 Dev5.Ch0=00A4 Dac_Led1
 Dev5.Ch1=00A4 Dac_Led2
 Dev5.Ch2=0FFF Dac_ZapV
 Dev5.Ch3=0000 Dac_Test
 Dev6.Ch0=0000 Unused
 Dev7.Ch0=2000 DacBiasQO
 Dev7.Ch1=2000 DacBiasQI
 Dev8.Ch0=1D0A DacBiasQA
 Dev8.Ch1=1D67 DacBiasQB
 Dev9.Ch0=1D67 DacBiasQC
 Dev9.Ch1=1D67 DacBiasQD
 DevA.Ch0=0711 PhononA
 DevB.Ch0=0711 PhononB
 DevC.Ch0=0711 PhononC
 DevD.Ch0=0711 PhononD
 DevE.Ch0=0BCC SqABias
 DevE.Ch1=0800 FbAnull
 DevE.Ch2=0800 FbBnull
 DevE.Ch3=0BFF SqBBias
 DevE.Ch4=0AAC LckPntA
 DevE.Ch5=0AB8 LckPntB
 DevE.Ch6=07FF vOffsetA
 DevE.Ch7=0800 vOffsetB
 DevF.Ch0=0BCC SqDBias
 DevF.Ch1=0BAD SqCBias
 DevF.Ch2=0ACC LckPntD
 DevF.Ch3=0A8F LckPntC
 DevF.Ch4=0800 FbCnull
 DevF.Ch5=0800 vOffsetD
 DevF.Ch6=02CD vOffsetC
 DevF.Ch7=0800 FbDnull
devd 1
 Dev1.Ch0=0000 SignalSrc
 Dev2.Ch0=1111 Zap
 Dev3.Ch0=1111 QetHeatEna
 Dev4.Ch0=0000 TstFetLeds
 Dev5.Ch0=00A4 Dac_Led1
 Dev5.Ch1=00A4 Dac_Led2
 Dev5.Ch2=0FFF Dac_ZapV
 Dev5.Ch3=0000 Dac_Test
 Dev6.Ch0=0000 Unused
 Dev7.Ch0=27FF DacBiasQO
 Dev7.Ch1=27FF DacBiasQI
 Dev8.Ch0=1D0A DacBiasQA
 Dev8.Ch1=1D67 DacBiasQB
 Dev9.Ch0=1D67 DacBiasQC
 Dev9.Ch1=1D67 DacBiasQD
 DevA.Ch0=0711 PhononA
 DevB.Ch0=0711 PhononB
 DevC.Ch0=0711 PhononC
 DevD.Ch0=0711 PhononD
 DevE.Ch0=0BCC SqABias
 DevE.Ch1=0800 FbAnull
 DevE.Ch2=0800 FbBnull
 DevE.Ch3=0BFF SqBBias
 DevE.Ch4=0AAC LckPntA
 DevE.Ch5=0AB8 LckPntB
 DevE.Ch6=07FF vOffsetA
 DevE.Ch7=0800 vOffsetB
 DevF.Ch0=0BCC SqDBias
 DevF.Ch1=0BAD SqCBias
 DevF.Ch2=0ACC LckPntD
 DevF.Ch3=0A8F LckPntC
 DevF.Ch4=0800 FbCnull
 DevF.Ch5=0800 vOffsetD
 DevF.Ch6=02CD vOffsetC
 DevF.Ch7=0800 FbDnull
Detector looks grounded during flashing. But timing is also important.
Time
11:05 Error window popped up after flashing, port hung after the error
11:08 Reset DCRC and load Preset 2
11:09 Check SQUIDs by looking at readout vi. Connection error happened after stop the readout vi
11:14 Reset DCRC and load Preset 2 again. SQUID locked after doing this
11:43 Did a new test, this time the readout vi survived after the first flash, right after flash the data taking started again, at the beginning, all pulses were glitches, the pulses came back in a while, phonon DC levels changed a bit. The connection error window popped up after the second flashing. Need to wait for a while after flashing.
Phonon DC levels before one flashing
Phonon DC levels after one flashing