Mike said they are doing good progress on the Liquifier but haven't mentioned if they will be up this week.
Thought more on making an endstop reading for the 2D source mover and found one solution. If we use the 3d printed endstops, as use copper tape to complete the circuit. Did one test and it seems to be working when the motor touches the endstop.
-
We can replace the other endstop and connect a resistor to the same circuit line to use it make two independent measurement for the X-axis.
Need something similar for the Y-axis motor as well. Most convenient location will be the parking spot. Will do more test if that will work.
