| Teleconference link: | https://umn.zoom.us/j/2461438631 |
| Domestic: | 1-646-558-8656 (US toll) |
| Domestic: | 1-408-638-0968 (US toll) |
| Access code: | 908-227-5310 |
- Lab Update - Run 77
- Arduino debugging complete. Seems like using Arduino_bridge through Firefox browser solves the disconnection problem.
- Swapped twisted pairs to make new channel mapping from the detector to the tower.
- Checked waveforms in the motor coil wires using a 75 ohm resistor and oscilloscope.
- motor coil 1 wires
- motor coil 2 wires
- No current when motor coils are plugged in. Motor coils are ~7 kohm in room temperature, is that the reason? Motor coils when cold, ~ 138 ohm. Didn't find any run diary entry in room temperature tests.
- Priority Updates
- Jack's Practice Talk
- General Updates
- Himangshu
- Shubham
- Jack
- Derek
- Zach
- Scott
- Giulia
- Fun Update